What size generator does my Gastonia home need?

The right size depends on whether you want whole-home backup or only essential circuits, plus the actual loads in the home. Whole-home backup for a typical Gastonia residence usually calls for a 22-26 kW unit, while essential-circuit backup can often be handled by 10-14 kW. Roland Black runs a full load assessment to recommend the right size, since oversized units waste money up front and undersized units leave you stranded during outages.

What fuel options work for standby generators in Gaston County?

Natural gas is the most common choice when it is available at the property, since it never runs out and requires no on-site storage. Propane is the second most common choice, especially in rural Gaston County areas where natural gas is not available. Roland Black handles both fuel types, including coordination with the gas utility or propane provider as part of the install.

How long does a generator installation take?

Most residential standby generator installations are completed in one to two days, depending on whether the existing electrical panel needs updating, how far the gas line has to be run, and whether the concrete pad needs to cure before placement. Our office coordinates the inspection and utility timing so the project moves smoothly.

Should I choose Generac or Kohler?

Both are excellent brands and Roland Black is certified on both, so we recommend whichever fits the homeowner's specific situation rather than steering toward one. Generac has broader market presence and more installer support, while Kohler is known for premium build quality and strong warranty terms. We walk through the trade-offs honestly during the consultation.

Is financing available for a generator installation?

Yes, on approved credit, with multiple plan options through our financing partners. Generator installations qualify under the same financing programs we offer for major HVAC and electrical work. Our office staff can run the application by phone before the install date, and approval decisions are usually quick.

Generator Installation in Gastonia, NC

CONTACT (980) 206-3523

Generator Installation in Gastonia, NC

Standby generators are one of the few home upgrades that genuinely change how a family weathers a long power outage—and Gaston County sees enough storm-driven outages to make the investment pay off. However, what you get from your generator is only as “good” as the quality of its installation and upkeep. That’s where we come in. Roland Black is a Generac Certified and Kohler Certified Installer, with the factory training, the correct tooling, and the licensing required to install standby systems the right way. We have been doing this work in Gastonia for over 50+ years, since well before whole-home generators were common in residential construction—and we bring that same level of mastery to every Gastonia generator installation service we attend. Considering an upgrade? Connect with us today. If you already own a generator that needs service, we’re also happy to help. Our generator repair team handles all major brand repairs across our community of homeowners.

Licensed & Insured

Technicians serving in NC & SC

50+ Years of Experience

Serving homeowners since 1973

24/7 Emergency Service

Rapid response—day or night

Trusted Brands

American Standard Platinum, Generac, Kholer & more

Certifications

American Standard, NATE, Customer Care Dealer, Trane Authorized Dealer

Community Involvement

Dream on 3, Absolute Hope Foundation

Free install estimate

payments as low as $97/mo

Same Day Service

CONTACT CALL

On This Page

What’s Included in a Roland Black Generator Installation?

An in-home assessment evaluates your home’s electrical load, fuel availability, and the right generator size for whole-home or essential-circuit backup.
Equipment options across Generac, Kohler, and other major brands are presented honestly, with the trade-offs explained clearly.
A written quote includes financing through our financing partners on approved credit.
The installation includes the concrete pad, the natural gas or propane fuel line, the automatic transfer switch, and the integration with your electrical panel.
Permits are pulled, inspections are met, the system is started up and tested under load, and the manufacturer warranty is registered before we leave.

Get In Touch

Successful (and Safe) Generator Installation Starts With Professional Installation

Standby generator installation involves licensed electrical work, gas piping, permits, inspections, and proper exhaust placement to avoid carbon monoxide hazards. Unfortunately, a generator placed too close to a window, a soffit vent, or an air intake can create real CO risks for the family it is supposed to protect—which is why the CPSC is explicit about siting and exhaust requirements for generators and engine-driven tools. Roland Black follows manufacturer siting requirements and local code on every install, mitigating any health and safety risks to your family.

Generator Installation Mistakes We Help You Avoid

Generator installs done badly create real problems—from a unit that fails the moment the power goes out to safety hazards that put the household at risk. Here are the three most common mistakes we see on generator service calls across Gastonia.

A generator sized too small for the home runs at maximum capacity during outages, which wears the engine and limits which circuits can run simultaneously. An oversized generator wastes money up front and runs inefficiently at light loads. We run a real load assessment during the consultation rather than recommending a generic size based on home square footage, because the right size is a precision answer.

Generators have to be placed at safe distances from windows, doors, soffit vents, and outdoor air intakes for HVAC equipment to avoid carbon monoxide entering the home during operation. Cutting these distances short to make the install easier creates real safety issues that may not show up until the generator runs for an extended period during an outage. We follow manufacturer siting requirements and local code on every install, and we will tell you upfront if your preferred location is not safe to use.

A new generator needs to be commissioned at startup with a documented load test, controller configuration, and self-test schedule, plus complete homeowner walkthrough on operation. Skipping this step leaves the generator with factory defaults that may not match your specific situation, and the homeowner often does not understand the basic operation when the first outage hits. Roland Black documents every commissioning step and trains the homeowner before we leave.

CONTACT (980) 206-3523

Financing
Options

Get the confort you need today-Pay over time

Check our Financing Options

Membership
Plans

Join and enjoy exclusive member benefits

Check our membership plans

Areas We Service

North Carolina

Gastonia

Belmont

Cramerton

Mt Holly

Charlotte

Huntersville

Denver

Cornelius

Davidson

Lincolnton

Maiden

Iron Station

Stanley

Pineville

Matthews

Hickory

Concord

Mooresville

Kings Mountain

Dallas

Cherryville

Waxhaw

Marvin

Weddington

Indian Trail

Kannapolis

South Carolina

Tega Cay

York

Rock Hill

Fort Mill

CONTACT (980) 206-3523

Roland Black: Your Generator Installers in Gastonia

A generator install is a meaningful project and a meaningful investment, and Gastonia homeowners deserve clear answers before committing. Here is what we hear most often when families are considering whole-home backup.

What size generator does my Gastonia home need? The right size depends on whether you want whole-home backup or only essential circuits, plus the actual loads in the home. Whole-home backup for a typical Gastonia residence usually calls for a 22-26 kW unit, while essential-circuit backup can often be handled by 10-14 kW. Roland Black runs a full load assessment to recommend the right size, since oversized units waste money up front and undersized units leave you stranded during outages.
What fuel options work for standby generators in Gaston County? Natural gas is the most common choice when it is available at the property, since it never runs out and requires no on-site storage. Propane is the second most common choice, especially in rural Gaston County areas where natural gas is not available. Roland Black handles both fuel types, including coordination with the gas utility or propane provider as part of the install.
How long does a generator installation take? Most residential standby generator installations are completed in one to two days, depending on whether the existing electrical panel needs updating, how far the gas line has to be run, and whether the concrete pad needs to cure before placement. Our office coordinates the inspection and utility timing so the project moves smoothly.
Should I choose Generac or Kohler? Both are excellent brands and Roland Black is certified on both, so we recommend whichever fits the homeowner’s specific situation rather than steering toward one. Generac has broader market presence and more installer support, while Kohler is known for premium build quality and strong warranty terms. We walk through the trade-offs honestly during the consultation.
Is financing available for a generator installation? Yes, on approved credit, with multiple plan options through our financing partners. Generator installations qualify under the same financing programs we offer for major HVAC and electrical work. Our office staff can run the application by phone before the install date, and approval decisions are usually quick.

Roland Black handles every part of a standby generator installation in Gastonia, from sizing through commissioning.

Whole-home generator installations cover the entire electrical panel and all circuits during an outage.
Essential-circuit installations back up only the specific circuits that matter most, including the refrigerator, furnace, well pump, and select outlets.
Generac Guardian and Protector series generators are installed under our Generac Certified credentials.
Kohler residential standby generators are installed under our Kohler Certified Installer credentials.
Natural gas and propane fuel systems are installed and pressure-tested as part of the project.
Automatic transfer switches are sized and installed to coordinate cleanly between utility power and generator power.
Concrete pads, exhaust placement, and equipment siting follow manufacturer and code requirements for safe operation.

Every install passes inspection before energization, with detailed homeowner walkthrough on operation, self-test schedules, and routine maintenance expectations.

We typically recomend that homeowners consider generator installation service if:

Your area experiences regular power outages from summer storms, winter ice events, or grid issues.
Someone in the household relies on medical equipment that requires uninterrupted power.
You work from home and cannot afford extended outages disrupting your livelihood.
You have a well pump, septic system pump, or sump pump that becomes critical during weather-related outages.
You have invested in an expensive home that you want to protect from food spoilage, frozen pipes, or other outage damage.
You have refrigerated medications, aquariums, or other perishable household needs.
You are interested in the resale value boost a permanent standby generator provides.

Any of these reasons on its own makes the conversation worth starting, and our consultation is no-pressure.

Roland Black books no-pressure generator installation consultations across Gastonia and Gaston County, offering our local homeowners support from our bilingual staff and licensed electricians. Call (980) 206-3523 to start your generator service process.

CONTACT (980) 206-3523

Related Services